Sicce VOYAGER NANO Stream Pump - 270 GPH 1 Each by Sicce

Product Description Asked to push the envelope for a small and efficient pump with high flow rate, the Voyager Nano was born. This pump, with a flow rate of 530 gallons per hour, gives new meaning to a small footprint without sacrificing the quality and efficiency discriminating hobbyists have come to trust from SICCE. The Voyager Nano is ideal for fresh or saltwater and for nano tanks as well as larger tanks. Product Benefits Ingredients Suggestions Use Instructions:To install the pump, proceed as follows:ATTENTION: Before making the product working, verify the integrity of all its parts. 1) To avoid resonance, vibrations and sand or stones being sucked into the pump, position it with adequate clearance to the sides and base of the tank.2) Insert the joint, positioned on the back of the pump, on the magnetic support.3) Clean the glass where the pump is to be installed. Submerge the pump completely and turn it in vertical position to allow any trapped air to exit from therotor’s cavity. 4) Set the magnetic support to the tank at a 10 cm (4 inches) from the center of the internal support.5) Drag it until perceiving of the opposite magnetic force and position the centers of the 2 supports on the same axis.6) Place the pump in the preferred position.7) Connect it to the electric network. Special Note Warnings DisclaimerPeta2z.com offers nationally branded products that are produced according to manufacturing standards set by regulators at everyday low prices. Do not use unproven, unbranded products, which can pose serious risks to your health.