Aquatop Eliminator Series In-Line UV Sterilizer Black, 36 Watts by Aquatop

Product Description Aquatop's Eliminator UV Series is the perfect solution for your clarification and sterilization needs. The Eliminator UV Series aids in controlling unwanted algae blooms and helps eradicate free-floating parasites such as Ich. With a specially designed internal baffling structure, the unit forces water to pass by the UV unit multiple times before exiting back into a body of water. Each unit is compact and easy to use. Simply cut the stepped hose adapters to the appropriate tubing size, connect hoses, add hose clamps and plug in. Suitable for both Fresh and Saltwater use. The Eliminator UV Series helps terminate aquatic pests and delivers crystal clear water. Suitable for both freshwater and saltwater use. Capable of handling capacities of 300 Gallons. 750 GPH Max Flow Rate. Product Benefits Ingredients Suggestions Assembly Instructions:Aquatop recommends installing the unit where it will not come in contract with water. Aquatop recommends installing the unit in such a manner that there are no kinks in the connecting hoses. 1. Place the eliminator UV unit in an area where it will not come in contact with water or in direct contact with the elements (i.e.. rain, direct sunlight, or high/low temperatures, etc.)2. Install the intake stepped/barbed fitting if needed cut to appropriate sizea) Place the gasket/O-ring onto the flange of the stepped/barbed fitting. Aquatop recommends using silicone O-ring lubricant to create a watertight seal (not included). b) Place the stepped/barbed fitting and gasket onto the threaded opening on the UV chamber3. Slide the threaded nut over the stepped/barbed fitting and tighten. Aquatop recommends hand tightening only. If the fitting is tightened too hard or too much the threaded nut may leak. 4. Repeat steps 2 3 for the output/discharge fitting. Aquatop does not recommend reducing the output/discharge fitting. The output/discharge tubing must be at least as large as the intake tubing. 5. Secure the intake and output tubing with hose clamps6. Turn on the unit supplying water to the unit7. Plug the eliminator UV into a GFCI electrical outlet only Special Note Warnings DisclaimerPeta2z.com offers nationally branded products that are produced according to manufacturing standards set by regulators at everyday low prices. Do not use unproven, unbranded products, which can pose serious risks to your health.